Tag: Wind Load Calculation
Wind Load Calculation as per Canadian Code | NBCC 2020 |
To calculate wind load as per the National Building Code of Canada (NBCC) 2020, the following steps summarize the process: 1. Reference Code and Formula Wind load calculation is governed by NBC 2020, specifically the provisions in Part 4, Section 4.1.7 (Wind Loads). The wind pressure (q) is calculated using: q=Iw⋅Ce⋅Cg⋅Cp⋅p Where: Iw: Importance factor… Read more
Wind Load Calculation as per IS 875 Part 3 2015
Wind Load Calculation Wind speed -33m/sec From Ground floor to Slab level – 14.675m SLAB LEVEL to NEXT Slab level – 9.0 m Horizontal support interval – 1.55m Height of the building = 27.725m say 28m Length = 39.450m Width = 22.195m Dead load = self weight of beam Wind load WIND SPEED – 42M/SEC… Read more
Building Load Calculation
1. INTRODUCTION: The structure is a “Multi-storied building” consisting of Two Basement Floors + Stilts Floor + Thirteen upper floors. The 2 basements are used for two-wheeler parking and one stilt floor for four-wheeler parking and all other floors are Residence area. The Structure is designed as a Reinforced concrete framed structure supported on raft… Read more